Detailed Product Description

2.video:

after open,if Infrared body sensor to detect the human body signal, devices will begin to

record at once(if cut off out power and only by battery, the devices will begin to record after 3 seconds ),keep recording 30 seconds. When the internal card are full, the devices will automatic remove the first video. and save the latest video, Equipment for the red indicator light that began to video or save video. For the green flashing light that is recording, please dont close the devices when this two kinds of light condition. Otherwise,they maybe less than this 30 seconds video recording.

3. view video:

First,turn the power switch to the position fo [OFF], and the USB device port connected to the computers USB port by USB cable.keep to hold down the [SET] button , and turn the power switch to the position of [ON],until the indicator light is green when the long,let go the [SET] button,after 1 to 3 seconds, the computer will detect removable disk , this devices will come into U disk model.you can watch the video by computer.

4,modify the device clock;

The device had already set the time when leave factory, but if cut off the power of device, the time will recovery january 1,2008.right now you need to modify the time.

Modify the steps are as follows;

First step: enter the USB mode

Second step: In the device's root directory, create a file called TIMECFG.TXT text file.

Three step: open the text file, enter the current time. For example : you want to set the time  at 18:20:30 on January 1, 2009. and enter file: TIME,2009/01/01/18:20:30;. Note: All characters and punctuation marks must be in English half-angle format, characters of beginning and end and intermediate without spaces, Letters must be uppercase.

Four step: exit U disk status after save the file. And reboot, the devices time will be the time that you set. And the device will automatic remove TIMECFG.TXT this file. If next time open the devices and find this file still stay. And need to detect  second step to four Whether the operation is wrong.

5. Equipment, software upgrades

After enter USB mode, In the device's root directory, Into the file named " ASHERJRM " of the bin file, Exit USB mode and shut down, Device will automatically begin the upgrade, Equipment for the orange indicator light flashes, After the switch to green slow flash, Finally out.  Shutdown  and restart Equipment, Upgrade completed, Upgrade have a risk, Do not casually operate. If you must upgrade equipment procedures,

Schedule:product parameter

Built in camera: CMOS 300,000 pixels

Image resolution:640*480

Recording frame:

30 frames / sec

Video startup modeMotion Detection

Infrared detection range≤6m

IR Night Vision Distance: ≤6m

Lithium batteries: continuous recording≤100minuters , standby: ≤200 hour

System support: Dos, Windows. Linux,MacOSX ect.

sales:alan